[x] ปิดหน้าต่างนี้
Powered by ATOMYMAXSITE 2.5
pkd.ac.th
เมนูหลัก

 

  

   เว็บบอร์ด >> >>
The 10 Scariest Things About Patio Screen Door Repair  VIEW : 29    
โดย Bradford

UID : ไม่มีข้อมูล
โพสแล้ว : 26
ตอบแล้ว : 1
เพศ :
ระดับ : 4
Exp : 21%
เข้าระบบ :
ออฟไลน์ :
IP : 37.143.63.xxx

 
เมื่อ : พุธ ที่ 21 เดือน สิงหาคม พ.ศ.2567 เวลา 21:07:10    ปักหมุดและแบ่งปัน

Patio Screen Door Repair - How to Do it Yourself

A damaged or worn-out screen door is not only ugly, it also provides an ideal entry point for mosquitoes, flies and other insects. Although there are services to repair your patio screen door, it's quite simple to complete the job yourself.

First, place the screen on a flat work surface. Remove the handle by taking off the screws that secure it.

Screens damaged

It's not surprising that your window or door screens will eventually develop holes and tears as a result of weather, pets, and children. Apart from looking ugly the damaged screens allow insects and flies to enter your home. Repairing these issues is easy. While patch kits and screen repair tape provide an easy fix for minor damage, they aren't suited to larger issues. This step-by-step guide will show you how to properly repair and replace your screen doors and windows.

The first thing to do is evaluate the damage. Are the frames salvageable or does it require to be replaced? This is crucial because, generally window and door frame screens are more prone to damage than the mesh. A bent frame could cause the screen to move out of alignment, which can result in holes and weak spots in the mesh.

After you've decided whether or not the frame is salvageable then you can begin to work on the mesh. For this task, you'll need a few essential tools. This process calls for a spline roll pressing the spline in the frame, a utility knife and scissors. These tools will ensure accuracy and durability when you do repairs.

If you have a large hole in your screen, start by removing as much possible of the old material to make a clean space. Then cut a patch of new screen material in a way that it is at a minimum half inch larger than the damaged area. The patch should be matched to the grid pattern of your window in the event that it has one. Finally trim the edges of the patch to eliminate any imperfections and fold them over the top of the spline to conceal the edges.

Consider the climate of your region when you are looking to purchase a new screen. Aluminum screens are sturdy and resistant to snags while fiberglass mesh is popular for its affordability and flexibility. You might also select a special insect screen mesh if you live in an area that is ravaged by mosquitoes or other pests. Whatever type of screen material you pick, be sure to stretch it tautly across the frame to prevent sagging or wrinkles.

Broken Rollers

A broken roller can be a frustrating issue. It's not just making it difficult to move your door, but it can also allow bugs and other unwanted visitors to enter your home. The good thing is that repair of your rollers isn't as expensive or difficult as replacing your door.

Start by examining the rollers to determine what the problem is. It could be that the wheel is flattened out, or maybe one end of the wheel has worn out due to constant contact with the track. Try to remove the wheels by putting an screwdriver between the bracket and the roller. If you're still unable to remove the roller, spray the shaft area with WD-40, and try again.

Also, you should look at the tracks from top to the bottom. Straighten bent tracks by hammering a block of wood against the bent portion. It is essential to keep the tracks clean as well as they could be a source of dust and grit.

Once you've identified what kind of roller that's broken, you can purchase a new one. Bring your old rollers to the hardware store so that you can ensure you're purchasing the right type. If your door has more than one roller then you will need to buy enough to replace them all.

Use an screwdriver inside of your door frame, near the rollers to loosen the screws or bolts for adjustment. Once the screws are loose, you can remove the rollers from the bottom of the door. This task should be done by someone else so that you don't need to use your hands.

After installing the new roller The door can be raised, and the bolts or screws for adjustment can be tightened. Verify the alignment of the rollers and track. If everything is in the correct place the patio door track repair screen will be able to slide into place with ease.

Frame Damaged

If your screen door is scratching against the frame, there are several ways to fix it. First, make sure the hinges are tight. A door can bind if the hinges are loose. If they are loose, tighten the hinge screws. If this fails, you may have to sand the frame's top to make it smooth.

Another common problem with screen doors is a rotting frame. It can be costly to repair, since it usually involves replacing the entire frame. To avoid this, be looking for indications of decay. Treat them as soon you notice them. Look for soft wood that is darker than the rest. Also, keep an eye out for areas where the wood is beginning to bow or warp. If you notice any of these issues you should contact an expert.

Repairing a damaged frame by using a mesh adhesive patch kit, which costs between $2 and $7. The kit comes with a small piece of mesh and glue, that you can use to fill any holes in your screen. If the damage isn't too severe you can attempt to repair it using wood filler. To do this apply the filler to the damaged area, wait for it to dry, then sand it to a smooth finish.

For a more durable solution, you can buy a frame lift, which is a structure made of metal that is bolted onto your existing frame and lifts it up. It can be expensive however it is the best choice if your frame is badly damaged or completely rotted.

To create a simple stand for your screen door, you can create legs from a scrap piece of wood or even a photo frame display stand. Attach brackets or wires to the back of the frame, allowing you to place the frame on the wall. You can add a piece felt to the bottom to protect the wall from scratches.

Broken Splines

A damaged screen spline could be as difficult to handle as damaged doors or frames. It may appear to be something minor that could be ignored and left unaddressed for too long could allow pests like mosquitoes and flies to get through. This can quickly escalate into the issue of a bigger scale and result in costly repairs or a new screen door.

The good news is that replacing broken spline is relatively easy and affordable, especially when you already have the tools. You will first need to take off the old screen door spline. This can be accomplished by laying the frame flat on a work surface like a table or the ground. Make use of a screwdriver in order to pry through the free spline and then pull it out. If the spline is especially worn or brittle, it may break as you attempt to remove it from the groove.

When you are removing the old spline, make sure that you remove any caulking that has been used to keep the spline from moving. This will ensure that the new spline is suitable for fitting into the grooves.

Make use of a utility blade to cut the excess screen around the frame once you have removed the old spline. This will ensure a secure, clean fit on all sides of your frame when you install the spline.

After you have a clear frame and the new screen material cut to size, it is time to start installing the new spline. Start on the short side of the frame. The spline should be rolled into the screen channel using your splining device. Continue to roll the spline, bringing it in as you go. Repeat this process for each of the shorter sides of the frame. As you are working make sure to keep the screen taut using spring clamps or tape.

Repeat the process for the second side after you have completed the splining of all the short sides. Finally, finish by splining the top and bottom of the frame.



Based on : Maxsite1.10 Modified to ATOMYMAXSITE 2.5
โรงเรียนชุมชนบ้านป่าก่อดำ 134 หมู่ที่ 10 บ้านป่าก่อดำ ตำบล ป่าก่อดำ อำเภอ แม่ลาว จังหวัด เชียงราย รหัสไปรษณีย์ 57250 โทร. 053666187

Based on : Maxsite1.10 Modified to ATOMYMAXSITE 2.5